Code:KAV20.11T80MG
Brand:KAVAN
GO-11T80MG (0.03s/60°, 18kg.cm)
High torque/ultra high speed narrow band (760µs) digital standard brushless 79g servo with titanium/hardened steel gear and wide input voltage range 4.8-8.4V, 3xBB, to be used as tail servo for 500-800 RC helis with advanced gyro/flybarless control systems. Torque 12.0kg.cm, speed 0.045s/60° at 4.8V, torque 14.0kg.cm, speed 0.039s/60° at 6.0V, torque 15.5kg.cm, speed 0.034s/60° at 7.4V, torque 18.5kg.cm, speed 0.030s/60° at 8.4V. Aluminium case for perfect cooling under high load. Not programmable.
On Stock
Rotate with mouse
High torque/ultra high speed narrow band digital standard 79g brushless servo with titanium/hardened steel gear and triple BB-ed output shaft. Works great as a tail servo for 500-800 RC helicopters featuring advanced gyro/flybarless control systems. All-aluminium case for perfect cooling under high load.
Narrow band servo - 760 µs neutral, refreshing frequency up to 666 Hz - only to be used with compatible gyro/flybarless control systems as the tail (yaw) servo. It may not be connected to the regular receiver channel output (1520 µs neutral). Always be sure you have set the correct (narrow band) servo type on your gyro/control unit.
GO-11T80MG is not programmable.
Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.
| Servo dimensions | Standard |
| Servo type | Digital |
| Programmable | No |
| Thrust at 4.8V [kg/cm] | 12 |
| Thrust at 6.0V [kg/cm] | 14 |
| Thrust at 7.4V [kg/cm] | 15.5 |
| Thrust at 8.4V [kg/cm] | 18.5 |
| Speed at 4.8V [s/60st.] | 0.045 |
| Speed at 6.0V [s/60st.] | 0.039 |
| Speed at 7.4V [s/60st.] | 0.034 |
| Speed at 8.4V [s/60st.] | 0.03 |
| Servo gears | Metal,Titanium |
| Ball bearings | 3× |
| High-voltage | Yes |
| Power supply [V] | 4.8 - 8.4 |
| Length [mm] | 40 |
| Width [mm] | 20 |
| Height [mm] | 37.5 |
| Weight [g] | 79 |
| Intended for | Helicopters |
Accessories (15)
Spare parts (1)
