CHALLENGER PRO 1/10 set 2,4GHz, Green
This item is not available in you region (United States)
RGT CHALLENGER PRO
Since RGT Challenger was launched at the end of 2022, it has been recognized by the market with its powerful configuration and superior performance. In order to further improve and enhance the performance of Challenger, RGT launches a significantly upgraded version of Challenger to match the market demand.
The Challenger PRO is powered by Hobbywing brushless FOC system (WP Fusion BLSYS for Crawler-540 SPEC-RTR), with strong low-speed torque and excellent linearity. The motor runs smoothly and quietly with excellent waterproof and dustproof protection to easily cope with all climates and terrains. BEC output of 7.4V/3A brings greater torque output for high-voltage servo.
The developers also focused on weight reduction, using nylon portal axles with spiral gears. PRO version retains the two-speed/DIG transmission, front drive and four-wheel drive modes and rear winch, but adds an electric disconnection of the rear anti-roll bar.
All five servos are equipped with metal gears, and the steering servo was upgraded to a 35kg steel gear with an aluminum case. The front portal gear covers now use a brass material, to increase the unsprung weight and improve the vehicle climbing performance.
The shock absorbers are upgraded as well, having a larger diameter and nano-titanium plating layer, which improves the damping smoothness and gives the car a better movement articulation.
Challenger PRO uses the original body design and adds multi-level spray paint with a matt finish.
Features:
- Front-mounted motor and 2-speed reverse drive gearbox.
- Switching between AWD, FWD and DIG mode.
- Electric disconnection of the rear anti-roll bar.
- Portal axles with reduction gears and 42 degrees steering angle.
- Brass front portal gear covers.
- Ball bearings all around, high-durability metal gears with slipper clutch.
- Raised drive-shaft mounting points on the axles thanks to spiral gears.
- Adjustable oil-filled metal dampers with nano-titanium plating.
- Two-section painted PC bodyshell with transparent windows in retro styling and multi-level spray paint with a matt finish, accessories, and flip opening.
- In-built winch with 25kg servo and unlock function.
- Realistic 1.9-inch wheels.
- Hobbywing brushless FOC system and 35KG high-torque metal-gear waterproof servo with aluminum case.
- 2.4GHz 8-channel radio set, specially designed for crawlers, with controls for transmission servo, DIG servo, sway-bar servo, winch and LED lights.
RTR set contains:
- Complete assembled model ready to run
- RC 2,4GHz transmitter
- Scale accessories
Necessary equipment: 4xAA transmitter batteries, main battery pack 7.4V LiPo or 11.1V LiPo with a corresponding battery charger.
** Spare parts that are not in our offer can be ordered from the manufacturer on request. The complete list can be found in the manual.
| Scale | 1/10 |
| Wheelbase [mm] | 313 |
| Width [mm] | 258 |
| Height [mm] | 246 |
| Length [mm] | 485 |
| Weight [kg] [kg] | 3.4 |
| Transmitter battery | 4×AA |
| Frequency [GHz] | 2.4 |
| Servo gears | Metal |
| Li-Po [čl.] | 2 |
| Li-Po [čl.] | 3 |
| Motor type | AC |
