Twisty is an elegant yet wild 3D aerobat. It has a wingspan of 1512 mm, a length of 1005 mm, weighs up to 750 g, and is easy to transport and store. It rotates independently the whole halves of its almost elliptical wing, and the horizontal tail surfaces are also floating and rotate completely. Although it is at home on a slope, it also performs well on smaller plains thanks to its powerful C2820-1450 brushless motor with a 7×6" folding propeller. Twisty comes in an ARF kit, and is available for pre-order with an orange or green finish. Release is expected to be at the end of June 2025.

We have launched pre-orders for the brand new KAVAN V15 radio. The V15 is a 24-channel RC kit for advanced recreational and sport modellers operating on a Twin 2.4GHz transmission system with full telemetry support. You can also choose ACCESS or ACCST D16 protocol, so the range of compatible receivers is extensive. The V15 design keeps the features and proven elements of the V20 transmitter but is smaller, lighter and more portable. It is suitable for controlling any model aircraft or heli/multi-copter, as well as a wide variety of ground models. There are two colour options, white and blue. You can find all the details about the V15 in the product cards, and both colour variants are already available for pre-order. Release is expected to be at the end of June 2025.

We are introducing new tuning control stick tops with aluminium anodized body and CNC-machined centre section for KAVAN V20 and V15 transmitters or FrSky alternatives. They have a built-in two or three position switch and push button. They will allow precise and easy switching of flight modes, on/off mixes or even landing gear extension/retraction without having to drop the stick and "fumble" for the right switch.

In this year's edition of the annual FMT Adler readers' poll, in which we are among the nominated manufacturers, there is still one month left until the end of voting. You can drop your digital ballot in the mail HERE, and by participating, you automatically enter into a draw for valuable prizes.

We have stocked the OMPHOBBY M5 („550“ class) and M6 („600“ class) high-performance helicopter kits. As with the previous helis, these new models allow the installation of a wide range of electronics for pilots of all categories. They are characterized by perfect steering response and quality workmanship, and the use of up to 90% of the parts common to the M5 and M6 is an undeniable advantage. This makes them very versatile and customisable helicopters. The M5 is designed for 15mm servos, so the KAVAN GO-1035 and GO-11T46 servos are perfect for it. For the M6 it is 20mm servos, so we recommend using GO-12S57 or GO-1180+GO-11T80. The manufacturer also renewed the production of the popular M1 V1 model, which we have in two colour variants.

The cutting-edge flybarless (FBL) unit FrSky VANTAC RF007, which utilises the latest Rotorflight 2.X technology, is now in stock. It has an internal gyroscope, barometer and accelerometer for maximum stability in flight. Whether you choose the version with the built-in Access or Twin 2.4GHz receiver, the RF007 allows for intuitive configuration, seamless real-time tuning via the transmitter V20's interface and provides an extensive range of features.

We have just launched new colour variants of the KAVAN Savage MAX foam park-flyer. The fresh design is based on the same base colours and can be found labelled as "V2". The other elements of the design and the kits remain as proven by the original pieces.

The semi-scale model of a successor to the legendary Albatros has a 1088mm wingspan and is powered by an 80mm brushless EDF. It has excellent flight characteristics that even the most demanding "scale-er" pilots will appreciate. The model is surprisingly stable, docile and has excellent control authority. The carefully tuned position of the suspended undercarriage considerably reduces the take-off speed and is perfect for smooth scale landings on both tarmac and groomed grass surfaces. This also makes the Skyfox viable as a first fan-powered model. It is available in the original Aero grey camouflage or a blank white variant for a custom finish.

We have added a faster and more powerful version of the low-profile KAVAN servo GO-1035MG Plus. The new programmable servo maintains the same dimensions (35.5×15×29.2 mm L×W×H) and weight (45 g) as its predecessor. It has titanium gears, an all-aluminum box, and is especially suited for F3A models, jets, hotliners, or 400–500 class helicopters. With 8.4V power, it achieves a speed of 0.07 s/60° and thrust up to 22 kg·cm. The GO-1035MG Plus, like all GO servos purchased since 1. 1. 2024, is covered by a 3-year extended warranty.

Stop by the KAVAN booth to see the new MKS 12-volt heli servos, FrSky flybarless unit VANTAC RF007, OMPHOBBY M2 EVO mk2, or carbon-composite blades by AzurePower and MS Composit. The new in-preparation transmitters KAVAN V15 and V10 won't be missing too, of course. We are looking forwards to your visit.

In December last year, the Japanese Tsukuba RC Arena (formerly Yatabe Arena) hosted the 9th edition of currently the most prestigious RC drift competition in the world, the All Japan E-Drift Championship 2024. Our colleague and team pilot Václav Jireš had the honour to participate in the three-day event and represent both the Czech Republic and the KAVAN team among 148 top drivers.

We have added a new programmable piece to our range of speed controllers, the KAVAN Smart PRO-45LV with built-in telemetry for brushless motors and 6S LiPo power supply. It has high efficiency, 40 A continuous current and a high quality BEC power stabilizer with adjustable steps of 0.1 V. It offers precise motor control at only 50g and has a range of protection circuits. It also allows configuration directly from the V20 transmitter using the Lua scripts.

We now have the new generation of OMP M2 Evo 3D helicopters in stock. They have a brand new advanced 2in1 control unit OFS3, fully pre-set and easy to use, which you can conveniently tune on the fly via a smartphone app. Beyond that is an even larger and more powerful direct-drive carrier rotor motor. And if you own a first-generation M2 Evo, we'll have conversion packages to the MK2 generation for you soon.

The KAVAN radio control ecosystem is expanding with the new R10 10-channel receiver operating on the Twin 2.4GHz transmission system. It has configurable ports (PWM/SBUS out/FPort/S.Port/SBUS IN), integrated telemetry and is equipped with an advanced interference suppression system for reliable signal transmission up to tens of kilometres. It supports redundant wiring in which both receivers fully operate simultaneously. A smart pairing system, a black box function for writing flight data, and wireless firmware updates make your life easier. The R10 receiver is also available in a variant with an integrated stabiliser, which features high-precision sensors and various user-configurable stabilisation modes.

We have expanded our line of KAVAN Plus speed controllers with a new 120A piece R-120SB Plus SBEC. It is used to control the RPM of recreational and sport model motors. It has a powerful BEC circuit to power the on-board servos and receiver, and has significantly improved throttle response and power stage control efficiency thanks to DEO control technology. Like the other controllers in the Pro series, it offers a wide range of features that are easily set up with the KAVAN Pro programming card.

We have released a brand-new balsa A3-category glider. The simple but powerful Orion builds on the experience gained from smaller hand-launch gliders. It has an adjustable side hook for towing or can be launched by throwing. The kit consists, as you're used to, of precision CNC-cut parts including the white covering fabric, so you'll make do with basic tools and chemicals for the build.

We have released a new tray for the V20 transmitter. The custom-cut counter is available in matte black or translucent satin blue. Together you will also find the new KAVAN cross-over strap with embroidered logo, metal clips, adjustable length and soft shoulder pads.

With Christmas approaching, we have discounted all KAVAN Grip GRE 1:18 and 1:24 mini expedition cars by 20 %.

We have added the new KAVAN Vectopor to our building materials offer. It is a finely porous material based on polypropylene, which you can use for building ultra-light and durable indoors, park flyers, shock flyers and so on. The boards are highly resistant to breaking and tearing, easy to shape and bond with contact or CA glue.