SWORKz S35-GT3.0e FTE Factory Team Edition 1/8 Brushless Power GT Pro Kit

The S35-GT3.0e Factory Team Edition (FTE) is an upgrade from the S35-GT2.2e FTE which won the 2023 IFMAR E-GT world cup. It was a special project created for the SWORKz GT drivers to compete in the GT Championships. The target is to always be faster, lighter and an easier driving feel.

The new car is designed with high quality aluminum bulk heads that can change diff positions. A Direct response steering servo savor with a new Ackerman system.

The latest S35-GT3.0e Lay Down Shock Tower System can apply to many lay-down shock positions. This is especially designed for high speed on road racing. Special options are the S35-GT2.2e FTE front upper and lower ultra hard material arms. Also included are the latest S35-4 rear lower ABS arms (ultra hard material) that improves the GT3.0e FTE's cornering speeds.

A brand new center solid axil design fitted with the plastic spur gears matched with high density motor pinion gears has also been completely revised on the S35-GT3.0e platform. This will significantly improve the driving experience compared to its predecessor.

The HET differentials developed by SWORKz are included with 13T pinions and 45T crowns.

The wishbone brackets with square inserts, allow the axle geometry of your SWORKz S35-GT3.0e FTE to be adapted to any track layout. The front and rear CVD wishbones are made of a newly developed composite materials. The side pans have also been redesigned.

The SWORKz S35-GT3.0e FTE has completely new rear knuckles made from composite materials combined with carbon plates that offers you the possibility for different setups.

From the world champion S35-GT2.2e FTE lightened chassis design, the chassis is now standard on the S35-GTe3.0 FTE. A standard layout for 2pcs of 2S batteries in saddle position which provides a lower center of gravity. It also comes standard with a Pro-composite Carbon electric ESC 40mm fan holder and 2 40mm holders for motor.  

S35-GT3.0e FTE FEATURES

• Weight-optimized, 4mm T7075 base chassis plate silver anodized with flat bumper design
• Front & Rear Shock Pro-composite Carbon Shock Towers
• Aluminum Shock End Extension Holders
• Shock End Extension Holders with Pin-Screws
• Front and Rear Adjustable Diff Position Design
• Aluminum Front & Rear Diff Case Design
• Aluminum Diff. Case Inserts
• Aluminum Lower Arm Plates
• Aluminum Front Upper Arm Holder
• Pro-composite Carbon Front & Rear Upper Desk Chassis Brace
• Aluminum Ackerman Steering Plate
• Aluminum Servo Savor Steering System
• Pro-composite Carbon Steering Knuckle Plates
• Comes standard with Ultra Hard Arms Front & Rear
• Comes standard with Ultra Hard Upper Arms Front
• Multi-adjustable Sway Bar Linkage System for Front & Rear
• Comes standard with HET Over Drive Gears (45T/13T)
• New Center Solid Axil design
• More balance weight positions
• Optimized composite T7075 aluminum parts
• Comes standard with Hard Material Center Spur Gear(57T)(Made in Italy)
• Pro-composite Carbon Electric Motor 2x40mm Fan Holders  
• Pro-composite Carbon Electric ESC 40mm Fan Holder