KAVAN PRO TYRE CA thin 20g

Top quality high-strength thin instant (cyanoacrylate) adhesive for modelling and general use specially formulated for RC car tyres. Supplied in a bottle with a clog-resistant application tip. 50 g package is great for contest pilots with a large consumption of glue.
The ultra-low viscosity thin-set instant adhesive is ideal for bonding non-absorbent and absorbent materials that adhere perfectly together - typical applications include bonding RC car tires to rims. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical application method: the adhesive is applied to the joint of perfectly fitting parts pushed together. The low viscosity ensures deep penetration into the tightest joints.

Features

• Colour: clear
• Viscosity: 2–10 mPa∙s
• Density: 1,04–1,06 g/cm³
• Optimum application temperature: 25 °C
• Curing time (depending on temperature and nature of materials to be bonded): e.g. nitrile rubber <3 s, stainless steel 10–15 s
• Full cure: 24 h
• Shear strength: 15–25 N/mm²
• Operating temperature range: -10 to +40 °C
• Max. temperature range: -40 to +85 °C
• Optimum gap width between bonded parts: zero
• The cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV56.9977 KAVAN PRO activator CA spray 150ml, KAV56.9958 KAVAN Activator CA Spray 150ml, KAV56.9959 KAVAN Activator CA Spray 200ml
Recommended adhesive/debonding agent: KAV56.9979 KAVAN CA adhesive 20g
Removing excess uncured adhesive: cloth or paper napkin moistened with acetone (if the bonded materials resist it).
Thinning the adhesive: if the instant adhesive thickens, this is a sign that it has already partially polymerised and lost its original properties - no "thinning" can bring it back. If you need a "thinner" instant glue, simply use a lower-viscosity type. The different types of KAVAN PRO instant adhesives can be mixed together to achieve optimum viscosity.
For use as a sealant, suitable fillers: microballoon filler KAV56.9980 KAVAN CA filler.
Suitable for bonding: RC car tyres, softwood and hardwood, particleboard, plywood, metals, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres, many plastics (including EPP and EPO).
Not suitable for bonding: polystyrene foam, polyethylene, Teflon, silicone.
Storing: in a tightly closed container, in a cool, dry, dark place (at +2 to +10 °C). Do not expose to temperatures below +2 °C.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.

Safety information

The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.

Warning
Contains: ethyl 2-cyanoacrylate
May cause respiratory irritation.
Keep out of reach of children. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Call a POISON CENTER/doctor if you feel unwell. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

UFI: A0FW-NM2U-010P-3NC5