KAVAN PRO TYRE CA medium 20g

Premium medium instant (cyanoacrylate) adhesive with high strength for modelling and general use specially formulated for RC car tyres. Supplied in a bottle with a clog-resistant application tip. 50 g package is great for contest pilots with a large consumption of glue.
The medium viscosity instant adhesive is ideal for bonding absorbent and non-absorbent materials that adhere well together. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical application method: The adhesive is applied to one of the contact surfaces and the parts are immediately pushed together, but the adhesive can also be applied to the joint of well-fitting parts pushed together.

Features

• Colour: clear
• Viscosity: 80–120 mPa.s
• Density: 1,04–1,06 g/cm³
• Optimum application temperature: 23 °C
• Curing time (depending on temperature and nature of materials to be bonded): e.g. nitrile rubber <5 s, - stainless steel 15–20 s
• Full cure: 24 h
• Shear strength: 15–25 N/mm²
• Operating temperature range: -10 to +40 °C
• Max. temperature range: -40 to +85 °C
• Optimum gap width between bonded parts: zero
• The cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator/accelerator: KAV56.9977 KAVAN PRO activator CA spray 150ml
Recommended adhesive/debonding agent: KAV56.9979 KAVAN CA adhesive 20g
Removing excess uncured adhesive: cloth or paper napkin moistened with acetone (if the bonded materials resist it).
Thinning the adhesive: if the instant adhesive thickens, this is a sign that it has already partially polymerised and lost its original properties - no "thinning" can bring it back. If you need a "thinner" instant glue, simply use a lower-viscosity type. The different types of KAVAN PRO instant adhesives can be mixed together to achieve optimum viscosity.
For use as a sealant, suitable fillers: microballoon filler KAV56.9980 KAVAN CA filler.
Suitable for bonding: RC car tyres, softwood and hardwood, particleboard, plywood, metals, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres, many plastics (including EPP and EPO).
Not suitable for bonding: polystyrene foam, polyethene, Teflon, silicone.
Storing: in a tightly closed container, in a cool, dry, dark place (at +2 to +10 °C). Do not expose to temperatures below +2 °C.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.

Safety information

The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.

Warning
Contains: ethyl 2-cyanoacrylate
May cause respiratory irritation.
Keep out of reach of children. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Call a POISON CENTER/doctor if you feel unwell. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

UFI: E5FW-NMFM-M10P-EAH9