Code:KAV16.1001

Barcode:8596450074019

Brand:KAVAN

Transmitter KAVAN V20 - Grey, 24-channel

Advanced 24-channel RC set Twin 2.4GHz/ACCST D16/ACCESS. Ergonomic robust body, precision gimbals with Hall sensors. Full telemetry support, large colour touch screen with intuitive user interface. ETHOS™ operating system. Extensive range of functions and mixes for all types of RC models. Support for telemetry receivers with classic PWM and S.BUS outputs.

On Stock

€599.00

Exactly according to preference

The rigorously CNC-machined aluminium gimbals are mounted on 10 ball bearings. Hall sensors instead of conventional potentiometers sense the movement of the sticks. This makes the control more precise and reliable. You can also customise the controllers to your own preferences. Easily adjust the length of the sticks, rotate the gimbals up to 8°, and limit the range of stick travel to 45° to 60°.

Comfortable and stylish

Looks matter. Comfort matters even more. The gimbals are closer to the edges of the transmitter body for a comfortable and secure grip. Both handheld and when using the. Switches, buttons, dials and trims are always within reach. So you don't have to take your eyes off your model for a second. But the stylish and vigorous exterior of the transmitter tempts you to do so.

Don't get jammed

The 2.4GHz simultaneous dual-frequency transmission system communicates simultaneously with both the receiver and the RF module. The two built-in 2.4GHz antennas have greater omnidirectional coverage for the transmitted signal compared to a single antenna. This makes the transmission uninterrupted and has a rapid response time of under 4 ms. Data (including telemetry) will flow safely to you over several kilometres.

Touch the colours

The large colour touchscreen has a resolution of 800×480 px on a 4.3" diagonal. It displays the ETHOS™ operating system environment. With adjustable display brightness, you won't get lost in the dark or directly under the sun. Intuitively, clearly, and most importantly, conveniently set up or display everything from basic telemetry to advanced mixes and curves directly in the transmitter. You can even choose the colour scheme or turn on dark mode and read everything in English or many other languages.

Connectivity for an easier life

Use the USB serial port for data transfer, battery charging, and even if you want to fly the simulator. And because it's USB-C, you always plug it in on the first try. Of course, there's also a trainer port, headphone jack or microSD card slot. Besides audio or voice alerts, you can also activate vibration feedback.

The operating system of the modellers

The ETHOS™ operating system is developed and built from scratch by experienced modellers. Intuitive and bulletproof. Makes the transmitter easy to operate. Doesn't hold you back. Offers many flight modes for all air models. Easily switch transmitter modes directly on the display. It also allows you to program the KAVAN servos directly on the display.

Dry batteries are passé

Plugging in a single connector is more elegant than searching for identical (and charged) batteries. The included 2S LiPo 4000mAh battery provides 6.5–8.4V power. It can be safely charged with a USB-C cable thanks to the built-in balancer. No need to remove it from the case. The available timer and warning signals take care of early warning of running out of power.

Rotate with mouse

KAVAN V20 is an advanced 24-channel RC set using a 2.4GHz simultaneous dual-frequency RF protocol with full telemetry support. It boasts a peak response time of up to 4 ms, with a range of up to tens of kilometres. You can choose ACCST D16 or ACCESS RF protocols too, also with telemetry. The V20 can therefore be paired with a wide range of KAVAN or FrSky receivers, telemetry or not, with classic PWM and S.BUS outputs.

V20 is suitable for both advanced and sport pilots. Excellent for controlling various aircraft models or heli/multicopters. You can also easily set it up for boats or land models, for example. To do this, use the wide range of functions and mixes available in the ETHOS™ operating system. You can conveniently adjust these to your preferences on the large colour touchscreen.

You have a pair of high-precision gimbals mounted on 10 ball bearings. This ensures perfectly smooth movement of the sticks in every direction. Their position is sensed by high-quality Hall sensors. Compared to potentiometers, they have higher sensitivity are not subject to mechanical wear and tear (most often around the centre position), and better withstand the effects of moisture and dust. The control is therefore more accurate and reliable.

For controlling other functions there are 6 three-position switches, 2 two-position (1 momentary) switches, 2 side rotary sliders, 6 user-programmable buttons (front) and two momentary buttons (rear). The built-in 6-axis gyro sensor can be set to control the throttle channel, control mix rates and is also used to wake up the display. The trim levers and knobs are all-metal, rigorously CNC-machined. The design of the controller layout and body ergonomics is the result of dozens of hours of testing and fine-tuning by the KAVAN team.

The transmitter body is sturdy and perfectly fits the hand. Rubberized grips on the sides and back of the transmitter provide a firm, comfortable and secure grip. From here you can reach all the controls without difficulty. The gimbals are located close to the edges of the transmitter. So you don't even need a tray to hold the transmitter comfortably. For maximum ergonomics, long tuning sticks with switches can also be purchased. You can rotate the gimbals up to 8° and limit their range of travel to 45–60°. Of course, there is also the possibility of adjusting the strength of the self-centering springs and ratchet. To change the mode, select the desired mode in the settings menu, and in a few moments adjust the throttle stick ratcheting.

The V20 has memory for up to 64 models expandable via microSD card. In addition to displaying telemetry data on the screen, voice output and vibration feedback are also available. Audio can be transmitted wired with the 3.5mm Jack connector. Trainer mode is also available via trainer cable or wirelessly via Bluetooth®.

It is powered by a 2S LiPo battery with a capacity of 4000 mAh, which can be charged directly via USB-C. The transmitter is equipped with a balancer (±50 mV) for 2S LiPo batteries, and charges with 2 A at 5 V.

Features

4.3" colour backlit LCD touch screen with 800×480 px resolution
Up to 20 flight modes for perfect control of your model in all conditions
Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
Memory for 64 models expandable via SD card
Voice output telemetry via cable with a 3.5mm jack
Updateable software
6 three-position switches, 2 two-position (1 momentary) switches
2 side rotary sliders, 2 momentary buttons on the rear
6 user-programmable buttons (front)
6-axis gyroscope sensor
Precision gimbals mounted on 10 ball bearings
Trainer mode via cable or wirelessly via Bluetooth®
F.BUS port for programming servos
Model names with 15 characters
Subtrims
Reversing the servo rates direction
End-point adjustments (EPA) and rate limiting
Servo speed setting
Resetting data
Fail-safe rates
Dual rates
Setting the rates along 2 exponential curves or 21-point curves.
Freely programmable mixes
Engine shutdown
Safe idle
Logical switches
Clear user menu with customizable widgets
Servo monitor and servo tester
Three timers (stopwatch or timer)
Model run time
Transmitter operating time
Controller positions checklist on startup
Adjustable display backlight intensity
Calibration of gimbals
Sound and vibration alarms
Range check
3-receiver operation mode setting