PRO RUNNER 1/10 set 2,4GHz, Red

RGT PRO RUNNER

RGT's latest model delivers an unbeatable price/performance ratio. The modern-looking bodyshell covers a chassis with a lowered center of gravity, which uses a two-speed transmission with reverse rotation, free switching between FWD and AWD mode including DIG system and increased front wheel speed (overdrive) by 6%.

The motor and transmission layout was already very well proven in the previous model RGT CHALLENGER, so they are used here with almost no change. Only the gear ratio has been increased slightly for even better control at low speeds. The resulting weight ratio between front and rear axle is 60%/40%.

While one micro servo controls the shifting between first and second gear, the other is reserved for switching between all-wheel drive, front-wheel drive and DIG function, bringing additional options and capabilities when navigating through difficult terrain.

Central transfer case adds a set of reverse gears, so the driveshafts connected to the front and rear axles can rotate in opposite direction. The reverse drive reduces torque twist and improves overall balance.

The use of spiral gears allowed the drive shafts to be mounted in the axles above the level of the suspension links. This has increased ground clearance in this part of the car, and the shafts are also better protected against ground contact.

Updated front axle design with CVD drive-shafts increases the maximum steering angle to 46 degrees.

A modern bodyshell with transparent windows is complemented by a range of realistic accessories and highly detailed headlights. These are controlled by a dedicated light module with a magnetic connector for effortless connecting. A built-in winch from the previous model, powered by a 25kg 360-degree servo with a 90cm long cable is also included.

Features:

• Front-mounted motor and 2-speed reverse drive gearbox with 6% overdrive function.
• Switching between AWD, FWD and DIG mode.
• Steering angle increased to 46 degrees.
• Ball bearings all around, high-durability metal gears with slipper clutch.
• Raised drive-shaft mounting points on the axles thanks to spiral gears.
• Adjustable oil-filled metal dampers with dual springs.
• Painted PC bodyshell with transparent windows and accessories.
• LED light module with a new magnetic connector for effortless connecting.
• In-built winch with 25kg 360-degree servo.
• Realistic 1.9-inch wheels.
• Powerful 35T RC550 brushed motor, 60A HobbyWing ESC and 25KG high-torque metal-gear waterproof servo.
• 2.4GHz 6-channel radio set, specially designed for crawlers, with controls for transmission servo, DIG servo, winch and LED lights.

RTR set contains:

• Complete assembled model ready to run
• RC 2,4GHz transmitter
• Scale accessories

Necessary equipment: 4xAA transmitter batteries, main battery pack 7.4V LiPo or 11.1V LiPo with a corresponding battery charger.

** Spare parts that are not in our offer can be ordered from the manufacturer on request. The complete list can be found in the manual.