Code:MAV0008
Barcode:8596450053540
Brand:MAV Sense
MAV Sense AMS (F5J)
Miniature electronic motor switch for electric powered glider contests (F5L, F5J, ALES, LMR etc.); cuts-off the motor at pre-set altitude or time, can work as a telemetric altimeter/variometer (0.1 m resolution). Compatible telemetry systems: JETI Duplex EX, Multiplex MSB, Graupner HoTT, Futaba S.BUS2. Dimensions 27x11x5mm, weight 7g, input voltage 3.5-12V. To be connected between the receiver and ESC; setting with Jetibox, transmitters or the MAV Sense PC USB interface.
This item is not available in you region (United States)
The Altitude Motor Switch (AMS) is a versatile device suitable for several competition categories where the altitude or motor run time shall be limited. It can be used also as a standalone telemetric variometer. The sensor is usually connected between the receiver throttle channel and the appropriate signal input of the electronic speed controller.
The AMS contains a sensitive barometric altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the change of altitude with resolution 0.1m. Using the integrated high power cables you can directly power the receiver and servos through the AMS from a BEC circuit of the speed controller.
MAV Sense products are designed and manufactured in the Czech Republic- Small dimensions. Possibility to power the receiver and servos through the AMS.
- Accurate measurement of absolute/relative altitude and climb/sink rate.
- Automatic telemetry detection: Duplex EX, Graupner Hott, Multiplex MSB, Futaba S.Bus2.
- Configurable alarms on altitude and climb rate.
- Configurable shutdown altitude.
- Configuration through the transmitter.
- Firmware updates.
- Supported competition categories: FAI F5J, ALES (altitude limited electric soaring), LMR (limited motor runtime) and all possible derivatives.
The set contents: AMS motor switch, instruction manual.
Power supply [V] | 3.5 - 12 |
Length [mm] | 27 |
Width [mm] | 11 |
Height [mm] | 5 |
Weight [g] | 7 |