- Aircraft
- Helicopters
- Multicopters
- Cars
- Boats
- Tanks
- Other models
- RC sets
- Receivers
- Servos
- Stabilisation and gyros
- RC simulators
- Engines
- Motors
- ESCs
- Batteries
- Charging
- Connectors and cables
- Measuring devices
- Aircraft accessories
- Helicopter accessories
- Car accessories
- Boat accessories
- Fuels, oils, lubricants
- Modeling chemicals
- Construction materials
- Fixings
- Tools and jigs
- Transport covers
- Discontinued models
- Promotion
KAVAN Smart PRO TW30 Power switch w/ telemetry
On Stock
Telemetry sensor TW30 combines touch switch functionality and a telemetry sensor in a single device. It uses advanced technology to reach minimum dimensions with an extensive set of handy features.
Switch TW30 is designed to turn on/off the electronics in your model and monitor the power state. This can be implemented by the receiver battery or the BEC circuit. TW30 does not contain any voltage stabilisation. The power switch has an integrated powerful electronic power switch that can be controlled via a touchpad located on the outside or inside of the model. The electronic switch can also be operated by a conventional mechanical switch, which is in signal function and does not flow primary current through it. Whether you use the touch control or a mechanical switch must be selected in the configuration of the device.
The device remembers its last operating state, and if the battery is accidentally disconnected, the TW30 will automatically boot up again as soon as the battery is connected again.
Features
- Touch switch function.
- Supported protocols: FrSky/KAVAN FPort, JETI Duplex EX, Graupner Hott, Multiplex MSB, Futaba S.Bus2, PowerBox P²Bus.
- Optional low voltage shutdown.
- Remembers the last operating state.
The set contains: T30 Power switch w/ telemetry, manual.
KAVAN Smart PRO T30 Power switch w/ telemetry is manufactured in Czechia by the company MAV Sense s.r.o.
Online instruction manual: wiki.kavanrc.com
