KAVAN Smart PRO Position Hall sensor

The magnetic (Hall) propeller position sensor for the KAVAN Smart PRO line of ESCs enables the motor and propeller to be stopped at an exact position (defined by the magnetic sensor location on the model and the magnet on the propeller/spinner).

Contains a Hall sensor to be installed to the model and a small magnet to be installed to the spinner, prop driver or propeller; the gap between the sensor and magnet should not be bigger than 1 mm.

Dimensions: 12×8×3 mm (sensor), Ø3×2 mm (magnet).

The set contents: Magnetic sensor with cable, magnet, 2 screws.

KAVAN Smart PRO Position Hall sensor is manufactured in Czechia by the company MAV Sense s.r.o.

Online instruction manual: wiki.kavanrc.com