- Aircraft
- Helicopters
- Multicopters
- Cars
- Boats
- Tanks
- Other models
- RC sets
- Receivers
- Servos
- Stabilisation and gyros
- RC simulators
- Engines
- Motors
- ESCs
- Batteries
- Charging
- Connectors and cables
- Measuring devices
- Aircraft accessories
- Helicopter accessories
- Car accessories
- Boat accessories
- Fuels, oils, lubricants
- Modeling chemicals
- Construction materials
- Fixings
- Tools and jigs
- Transport covers
- Discontinued models
- Promotion
KAVAN covering film - fluorescent green
On Stock
The KAVAN iron-on covering film is manufactured from a high strength yet very thin and light polyester polymer coated by a layer of heat-sensitive adhesive with high quality pigments. It is supplied in rolls with a width of 64 cm and a length of 2 m, the back side with the adhesive is protected by a clear protective liner.
The KAVAN iron-on film is resistant to model hobby fuels - glow, diesel and petrol.
The thickness of the film is 50-65 µm (including glue) and the area density is 63-70 g/m2 (generally, darker coulours have slightly lower grammage than lighter ones).
Shrinkage of the film is 5-10%; the same in all directions.
It is possible to use ordinary model hobby sealing irons and hot air guns, the working temperature range is approx. 95-180°C. The optimal temperature for attaching to the frame is approx. 95-100°C, the temperature for shrinking approx. 130-140°C, for contouring of curves 140-160°C.
