Brushed ESC WP-40A Crawler

Brushed controller for 1/10 crawler vehicles

Konect is your reliable partner when it comes to getting the maximum performance out of your RC car.

The 40A continuous load regulator is waterproof and has a BEC which provides 6V with 2A power and is therefore sufficient for all common applications in this scale. It is easy to switch between LiPo and NiMH operation via a jumper, no time-consuming programming is required. Reverse can also be easily deactivated if required, which can be particularly advantageous in racing mode.
Last but not least, the controller also has a number of safety systems to protect the electronics such as the LiPo battery and controller from damage due to overheating or undervoltage, for example.

FEATURES:
Ideal speed control for almost all 1/10 scale Crowler and Expedition vehicles, with AUTOMATIC STOP BRAKE With the Konect 40A WP electronic brushed speed control you will have maximum driving fun, mega performance and zero problems.

• Waterproof & dustproof speed control
• Powerful 6V BEC with 2A
• Aluminum heat sink for optimal cooling during operation
• On/Off switch
• Proportional throttle & brake for sensitive handling
• Deactivatable reverse gear
• Automatic roll-off brake
• LiPo battery suitable
• Completely ready for connection for battery & motor (plug & play) no more soldering necessary

TECHNICAL DATA

• Continuous current: 40A
• Peak current: 180A
• Input voltage:
• 2-3S LiPo batteries
• 5-9 cells NiMH / NiCd batteries
• BEC output power: 6V/2A Internal resistance: 0.002 Ohm
Motor limits: 2S LiPo / 6Z. NiMH = more than 12 turns, 550 & 540 size motor rpm less than 30,000 @ 7.2V, 3S LiPo / 9Z. NiMH = more than 18 turns, 550 & 540 size motor rpm less than 20,000 @ 7.2V
• Type: Brush motors (no brushless)
• Connector system: Battery side: T-Dean connector
• ESC / motor: 4mm gold contact sockets
• Receiver: JR / Graupner
• Approx. dimensions: 46.5 x 34 x 28.5mm
• Weight: approx. 65g

• 1/10 Crawler
• 1/10 Expedition