ManiaX Lipol 7.4V 5200mAh 30C RX

The specific conditions of the receiver operation call for a dedicated type of LiPo batteries – there is no need for extremely high discharge rates but low self-discharge and tolerance to irregular charging cycles and long term storage in fully charged state are essential. We are happy to introduce a special line of 30/60C ManiaX LiPo batteries optimized for receiver use.

Do not use a charge rate higher than 3C, the recommended charge rate is 1C. We recommend using a balancer during every charge. ManiaX transmitter LiPo batteries do not require any initial forming; however, the initial three charging cycles should be performed at a rate not higher than 0.5C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.

The batteries are supplied as packs optimized for models featuring high torque/high speed servos. The packs feature heavy duty silicone power (charging) cables with the XT60 connectors and balance cables with JST-XH connectors that could be connected directly to the balance sockets of the most of KAVAN, SkyRC, GT Power etc. chargers.

The package contents: ManiaX battery pack, instruction manual.