KAVAN CA Activator Spray 250ml

ATTENTION: Restricted to professional users. Not to be sold to consumers.

Activator/accelerator for instant (cyanoacrylate) adhesives in aerosol packaging. Used to accelerate the curing of instant adhesives in conditions unfavourable to their natural curing (reaction with air moisture or water contained in the glued parts) in dry environments, in cold conditions, when glueing inactive materials or when applying a thick layer of adhesive. The product contains a proprietary polymerization activating component of the instant adhesive, solvents and propellant gas (propane/butane). For this reason, it must not be used when bonding materials that are not resistant to organic solvents (e.g. styrofoam).

Application: the accelerator is applied from a distance of 20–25 cm on clean and dry surfaces, the optimum working temperature range is +10 °C to +30 °C. It can be applied in one of two basic ways:

• Small parts: Apply the accelerator to one glued surface and allow it to dry (it remains active for several hours). Then apply the instant adhesive to the other mating surface and adhere to the parts.
• Large parts: Apply hot melt adhesive to one mating surface, press the parts together and spray the joint with the accelerator.

Suitable for: instant adhesives when bonding organic solvent-resistant materials.

Not suitable for: polystyrene foam and other materials that are not resistant to organic solvents or elevated temperatures (accelerated polymerisation of the adhesive can release significant amounts of heat, leading to heating of the bonded joint and its surroundings - the greater the amount of adhesive used).

Storing: in a tightly closed container, in a cool, dry and dark place (at +5 °C to +25 °C). Do not expose to temperatures below +2 °C.

Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.

Safety information

The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.

Danger
Contains: pentane, DIMETHYLTOLYLAMINE
Extremely flammable aerosol. Pressurised container: May burst if heated. May cause drowsiness or dizziness. May cause cancer. May cause damage to the circulatory system and respiratory tract through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/protective clothing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Collect spillage. Protect from sunlight. Do no expose to temperatures exceeding 50 °C.
Repeated exposure may cause skin dryness or cracking.
Restricted to professional users.

UFI: TJGW-RMGY-H10K-0SUA