SW-2293SG BRUSHLESS HiVOLT 3S Digital servo WATERPROOF (75kg-0,11s/60°)

A direct-power servo designed for crawlers using 3S LiPo setups. Runs straight from your LiPo with separate power/signal wiring — no BEC bottleneck, no compromises.

With rugged construction, durable gearing, and high-voltage compatibility, Blue Line servos keep going even when the trail gets rough. When you can’t predict the conditions - this is the servo to trust. IP67 waterproof-rated and ready for anything.

Specifications:

• Line: BLUE LINE
• Application: CAR / BOAT
• Servo Size: Standard
• Operating Voltage: 12.6V
• Speed @12.6V: 0.11 s/60°
• Torque @12.6V: 75.0 kg/cm
• Amplifier Type: Digital Controller
• Motor Type: Patented Lightweight Brushless
• Case Type: Aluminum
• Protection: Waterproof (IP67)
• Dimensions (L x W x H): 41 x 21 x 39.9 mm
• Weight: 90 g
• Gear Type: Specialized Steel
• Compability: Sanwa SUR, SSR; Futaba UR, SR
• PCB Board: 32-bit
• Horn Gear Spline: 25T(Φ6)
• Rotating Direction: Counterclockwise (when 1000→2000 μsec)
• Max Travel: ~180° (when 600→2400 μsec)
• Operating Travel: 100° (when 1000→2000 μsec)
• Neutral Position: 1500 μsec
• Bearing: 3x Ball Bearings
• Potentiometer: VR
• Cable Diameter: 22 AWG
• Cable Length: 450 ±5 mm
• Connector: JR Connector
• Stall Current @12.6V: 6500 mA
• Operating Current @12.6V: 100 mA
• Idle Current: 5 mA
• Dead Band Width: 3-5 μsec
• Frequency Range: 50-360 Hz
• Control System: Pulse width modification
• Operating Temperature: -10°C to 50°C